Fixed Droplet Size for consistent results
If your application requires precise, repeatable and consistent fogging, the Pow-R-Jet 6309 is the machine to use. It features automatic dispersion in an easy, one-step operation.
The Pow-R-Jet fogger controls flow and droplet size with a #0700 precision flow restrictor, not a valve, so output and fog distribution are identical every time. Once you select the chemical formulation and restrictor size, the only variable is run time.
This makes the 6309 appropriate for "protocol-based" treatments such as sanitation or disinfection. As an example, infection control or quality control specialists may establish application parameters for a room, but operating or maintenance personnel do the actual work. In this situation, the 6309 lets you lock down most important variables; treatment instructions need specify only fogging duration for uniform results.
Maximum output rate is 8-10 oz/min, which produces a heavy, wet fog with droplets that settle quickly. The minimum output is 0.1 oz/min, using a #6 restrictor. This delivers ultra-fine droplets so small they can't be seen without directional lighting.
In between these extremes, you can choose the flow rate and droplet size appropriate for your appliciation. A Tech Note contains data on available restrictor sizes and flow rates. (Download the FTN-013 pdf file).
If you need several size restrictors for different locations or chemicals, use the 0700Q Quick Change restrictor assembly. These are available in a wide range of flow rates and attach to the fogger power head with a simple twist-lock connector. The 0700Q also includes a dust cap to keep dirt from the the restrictor when it is out of service.
The 6309 can atomize either water- or oil-based solutions. And it's compatible with our timers and turntables (see accessories) to make your fogging job even easier.
|