Designed for aggressive chemicals
The Vectra-Jet™ 7505 fogger can apply a thin (or
thick) layer of sanitizing or disinfecting chemical to control undesirable microorganisms
in clean rooms, packaging lines, storage areas,
emergency vehicles, shipping containers and the like.
The machine pulls chemical solution from a 1-gallon
reservoir and discharges it as a fog of fine droplets. The
powerful discharge carries the fog plume a distance of 35-
50 ft and creates eddies that spread it laterally.
Carry it by hand, place it on a
table or stool, or use it with the 6100 turntable for uniform 360° distribution. You can control fog timing manually, or with one of our timers (see Accessories).
The Vectra-Jet ULV was designed with disinfection applications in mind. Droplet size is adjustable with the 9-turn valve, down to very small droplets
that float widely, resist settling and penetrate tight spaces. A high efficiency intake filter protects the motor
from chemical droplets suspended in the air.
The Vectra-Jet uses corrosion resistant materials, such as stainless steel (for fittings, valve and
liquid reservoir), Viton® rubber (for tubing and O-rings) and Celcon® acetyl copolymer
(for nozzle components). Units can also be specified with HDPE or stainless steel nozzle elements for extra protection when applying strong oxidizers like peracetic acid, hydrogen peroxide or gluteraldehyde.
|
